QFX3008-FAB-2INTC-BNDL коммутатор Juniper
Part № QFX3008-FAB-2INTC-BNDL
Описание: QFX3008-FAB-2INTC-BNDL коммутатор Juniper QFabric QF/Interconnect Bundle with 2 QF/Interconnects, 2 16-port 40G I/O modules and 16 QFX-SFP-1GE-T optics (Note: AC power cords are sold separately)
Коммутатор Juniper QFX3008-FAB-2INTC-BNDL состоит из трех отдельных, но связанных друг с другом компонентов, которые традиционно входят в состав модульного коммутатора: линейных плат, объединительной панели и модулей маршрутизации. Поскольку компоненты коммутатора не заключены в общий корпус, QFX3000 позволяет создать хорошо масштабируемую структуру, расширяемую по мере роста потребностей центра обработки данных. При этом скорость работы оборудования не снижается, а сложность управления сравнима со сложностью управления одним коммутатором.
Технические характеристики QFX3008-FAB-2INTC-BNDL коммутатор Juniper:
| Form Factor | Distributed switch composed of three components: QFX3500/QFX3600/QFX5100 QFabric Node QFX3600-I/QFX3008-I QFabric Interconnect QFX3100 QFabric Director |
| Dimensions (W x H x D) | QFX5100 QFabric Node: 1.72 x 17.36 x 21.47 in (4.37 x 44.09 x 54.54 cm), 1U |
| QFX3500 QFabric Node: 17.25 x 1.75 x 28 in (43.82 x 4.45 x 71.12 cm); 1U |
|
| QFX3600 QFabric Node: 17 x 1.74 x 19.4 in (43.2 x 4.4 x 49.3 cm); 1U |
|
| QFX3600-I QFabric Interconnect: 17 x 1.74 x 19.4 in (43.2 x 4.4 x 49.3 cm); 1U |
|
| QFX3008-I QFabric Interconnect: 17.5 x 36.75 x 32 in (44.45 x 93.34 x 81.28 cm); 21U |
|
| QFX3100 QFabric Director: 17.5 x 3.5 x 23.75 in (44.45 x 8.89 x 60.33 cm); 2U |
|
| Data Rate | QFX3000-M: 5.12 Tbps switching capacity QFX3000-G: 40 Tbps switching capacity |
| Port Densities | From 200 to 6,144 server-facing 10GbE/FCoE ports in a single QFabric System |
| Latency | 3 to 5us across fabric, under typical loads <1us per QFX3500 or QFX3600 QFabric Node |
| Resiliency | QFX3500/QFX3600/QFX5100 QFabric Node: Redundant power supplies Redundant fan trays |
| QFX3600-I QFabric Interconnect: Redundant power supplies Redundant fan trays |
|
| QFX3008-I QFabric Interconnect: Redundant power supplies Redundant fabric cards Redundant control boards |
|
| QFX3100 QFabric Director: Redundant power supplies Redundant disk drives |
|
| Power Options | QFX5100 QFabric Node: 100 to 240 VAC (single phase) at 50/60 Hz or -36 to -72 VDC Power Consumption: 335 W |
| QFX3500 QFabric Node: Power feed (voltage): 100 to 240 V AC (single phase) and 50/60 Hz or -40 to -72 V DC Power consumption (maximum): 365 Watts Power consumption (nominal): 230 Watts |
|
| QFX3600 QFabric Node: Power feed (voltage): 110 to 240 V AC (single phase) and 50/60 Hz or -40 to -72 V DC Power consumption (maximum): 345 watts Power consumption (nominal): 255Power consumption (nominal): 255 |
|
| QFX3600-I QFabric Interconnect: Power feed (voltage): 100 to 240 V AC (single phase) and 50/60 Hz or -42 to -72 V DC Power consumption (maximum): 345 watts Power consumption (nominal): 255 |
|
| QFX3008-I QFabric Interconnect: Power feed (voltage): 200 to 240 Volt AC (single phase); 240 Volt (3 Phase) Power consumption (maximum): 6,420 Watts (fully loaded) Power consumption (nominal): 4,620 Watts (fully loaded) |
|
| QFX3100 QFabric Director: Power feed (voltage): 100 to 240 Volt AC (single phase) Power consumption (maximum): 476 Watts Power consumption (nominal): 220 Watts |
|
| Operating System | Junos |
| Traffic Monitoring | Port-based LAG port VLAN-based ACL-based Mirror to local and remote destinations (L2 over VLAN) |
| QoS | Policers (ingress and egress): 1,500 per QFX3500/QFX3600/QFX5100 QFabric Node Queues: 12 per QFX3500/QFX3600/QFX5100 QFabric Node-8 unicast and 4 multicast |
| MAC Addresses | 120,000 – 1,536,000 |
| Jumbo Frames | 9216 Bytes |
| IPv4 Unicast Routes | 16,000 |
| Number of VLANs | 4,096 active; 4,090 configurable |
| FCoE/FC | FCoE Interfaces: 6,144 max FC Interfaces: 1,536 max Transit switch / FIP snooping FCoE sessions: 48,000 max VF_Ports: 384,000 max |
| Warranty | Juniper standard one-year warranty |
